home *** CD-ROM | disk | FTP | other *** search
- Path: nntp.nord.eunet.no!not-for-mail
- From: ebbesen@nordnett.no (Tommy Ebbesen)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: MikroniK Z-III expansion....
- Date: 24 Feb 1996 16:17:38 +0100
- Organization: EUnet NORD AS Dial-up Internet site.
- Sender: ebbesen@login.nord.eunet.no
- Message-ID: <2310.6628T923T1131@nordnett.no>
- References: <4gajlj$qpu@final.dystopia.fi> <1739.6623T1264T1040@metrolink.net>
- NNTP-Posting-Host: login.nord.eunet.no
- X-Newsreader: THOR 2.21 (Amiga;SOUP)
-
- >>Has anyone buyed MikroniK made Zorro-III expansion for A1200? Will it work
- >>with Blizzard 1230-IV turbocard? And how a video slot is made,
- >>because they are no video-signals in A1200 150-pin connector
- >>(or i think so), so will these scandouplers made for A4000 work with
- >>it?
-
- >>if you have any info please let me know. Thanks.
-
- >>... Speed Kills - Use Windows!
- >>___ Offline Orbit v0.80 (026)
- >>--
- >>| Tuomas Paasiala | Saab 99 -69 1.7 | A1200 -030/50/6MB/1.1GB
- >>| tuomas@dystopia.fi | - It's my life | SCSI HD/V34/4*CD-ROM
-
- >I am somewhat familiar with the Micronik 1200 tower kit, but to the
- >best of my knowledge, it does not do Zorro III, only II. And it does
- >not have video slots, at least in the version available now. At Cologne,
- >Micronik showed me a new board with video slot capability, but said it
- >would be awhile before it was available.
-
- >The Micronik tower expansion board will not work properly with GVP,
- >Microbotic, MTEC, DKB or CSA accelerator cards. It is reported by one tester
- >to work with the Blizzard 1230-IV; I am waiting for one now to try. I do not
- >own a 1200 tower, but a dealer friend 20 miles away has several. He is
- >unhappy with them so far; he was told that they would work with the most
- >recent versions of the DKB Cobra and Mongoose accelerators, but we could not
- >make them work. He wants to return the Microniks, but I asked him to hold
- >off until my Blizzard comes in and we can try it.
- ZII from Mironick did work with my old Blizzard 1230 II, but it didn't
- work with my pcmcia Cd-rom.
-
- >Eagle Computers told me about two weeks ago that in March, they will have a
- >1200 Tower kit that does ZII/III and has video slots. And is completely
- >compatible, because it apparently uses the Super Buster chip found in the
- >4000 (if I understood them correctly).
- Is it possible to use the ZIII from Eagle Comp. in a Micronik Tower?
- Do they have any email/www?
-
-
- cU.:)
- tOmMy
- _ _
- - -- --- //\ Tommy Ebbesen ebbesen@nordnett.no /\\ --- -- -
- - -- --- // \ Amiga 1200 Tower, 060 50MHz & 8MB / \\ --- -- -
- - -- --- \\ / HD 120 MB, CD-Rom, Monitor C-1942 \ // --- -- -
- - -- --- \\/ USRobotics Sportster 28800 \// --- -- -
- » »
-